<?xml version="1.0"?>
<!--
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
-->
<!DOCTYPE document [
  <!ENTITY project SYSTEM "project.xml">
]>
<document url="valve.html">

  &project;

  <properties>
    <author email="craigmcc@apache.org">Craig R. McClanahan</author>
    <title>The Valve Component</title>
  </properties>

<body>

<section name="Table of Contents">
<toc/>
</section>

<section name="Introduction">

  <p>A <strong>Valve</strong> element represents a component that will be
  inserted into the request processing pipeline for the associated
  Catalina container (<a href="engine.html">Engine</a>,
  <a href="host.html">Host</a>, or <a href="context.html">Context</a>).
  Individual Valves have distinct processing capabilities, and are
  described individually below.</p>

    <p><em>The description below uses the variable name $CATALINA_BASE to refer the
    base directory against which most relative paths are resolved. If you have
    not configured Tomcat for multiple instances by setting a CATALINA_BASE
    directory, then $CATALINA_BASE will be set to the value of $CATALINA_HOME,
    the directory into which you have installed Tomcat.</em></p>

</section>


<section name="Access Logging">

<p>Access logging is performed by valves that implement
<strong>org.apache.catalina.AccessLog</strong> interface.</p>

<subsection name="Access Log Valve">

  <subsection name="Introduction">

    <p>The <strong>Access Log Valve</strong> creates log files in the
    same format as those created by standard web servers.  These logs
    can later be analyzed by standard log analysis tools to track page
    hit counts, user session activity, and so on.  This <code>Valve</code>
    uses self-contained logic to write its log files, which can be
    automatically rolled over at midnight each day.  (The essential
    requirement for access logging is to handle a large continuous
    stream of data with low overhead. This <code>Valve</code> does not
    use Apache Commons Logging, thus avoiding additional overhead and
    potentially complex configuration).</p>

    <p>This <code>Valve</code> may be associated with any Catalina container
    (<code>Context</code>, <code>Host</code>, or <code>Engine</code>), and
    will record ALL requests processed by that container.</p>

    <p>Some requests may be handled by Tomcat before they are passed to a
    container. These include redirects from /foo to /foo/ and the rejection of
    invalid requests. Where Tomcat can identify the <code>Context</code> that
    would have handled the request, the request/response will be logged in the
    <code>AccessLog</code>(s) associated <code>Context</code>, <code>Host</code>
    and <code>Engine</code>. Where Tomcat cannot identify the
    <code>Context</code> that would have handled the request, e.g. in cases
    where the URL is invalid, Tomcat will look first in the <code>Engine</code>,
    then the default <code>Host</code> for the <code>Engine</code> and finally
    the ROOT (or default) <code>Context</code> for the default <code>Host</code>
    for an <code>AccessLog</code> implementation. Tomcat will use the first
    <code>AccessLog</code> implementation found to log those requests that are
    rejected before they are passed to a container.</p>

    <p>The output file will be placed in the directory given by the
    <code>directory</code> attribute. The name of the file is composed
    by concatenation of the configured <code>prefix</code>, timestamp and
    <code>suffix</code>. The format of the timestamp in the file name can be
    set using the <code>fileDateFormat</code> attribute. This timestamp will
    be omitted if the file rotation is switched off by setting
    <code>rotatable</code> to <code>false</code>.</p>

    <p><strong>Warning:</strong> If multiple AccessLogValve instances
    are used, they should be configured to use different output files.</p>

    <p>If sendfile is used, the response bytes will be written asynchronously
    in a separate thread and the access log valve will not know how many bytes
    were actually written. In this case, the number of bytes that was passed to
    the sendfile thread for writing will be recorded in the access log valve.
    </p>
  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Access Log Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.AccessLogValve</strong> to use the
        default access log valve.</p>
      </attribute>

      <attribute name="directory" required="false">
        <p>Absolute or relative pathname of a directory in which log files
        created by this valve will be placed.  If a relative path is
        specified, it is interpreted as relative to $CATALINA_BASE.  If
        no directory attribute is specified, the default value is "logs"
        (relative to $CATALINA_BASE).</p>
      </attribute>

      <attribute name="prefix" required="false">
        <p>The prefix added to the start of each log file's name.  If not
        specified, the default value is "access_log.".</p>
      </attribute>

      <attribute name="suffix" required="false">
        <p>The suffix added to the end of each log file's name.  If not
        specified, the default value is "" (a zero-length string),
        meaning that no suffix will be added.</p>
      </attribute>

      <attribute name="fileDateFormat" required="false">
        <p>Allows a customized timestamp in the access log file name.
           The file is rotated whenever the formatted timestamp changes.
           The default value is <code>yyyy-MM-dd</code>.
           If you wish to rotate every hour, then set this value
           to <code>yyyy-MM-dd.HH</code>.
           The date format will always be localized
           using the locale <code>en_US</code>.
        </p>
      </attribute>

      <attribute name="rotatable" required="false">
        <p>Flag to determine if log rotation should occur.
           If set to <code>false</code>, then this file is never rotated and
           <code>fileDateFormat</code> is ignored.
           Default value: <code>true</code>
        </p>
      </attribute>

      <attribute name="renameOnRotate" required="false">
        <p>By default for a rotatable log the active access log file name
           will contain the current timestamp in <code>fileDateFormat</code>.
           During rotation the file is closed and a new file with the next
           timestamp in the name is created and used. When setting
           <code>renameOnRotate</code> to <code>true</code>, the timestamp
           is no longer part of the active log file name. Only during rotation
           the file is closed and then renamed to include the timestamp.
           This is similar to the behavior of most log frameworks when
           doing time based rotation.
           Default value: <code>false</code>
        </p>
      </attribute>

      <attribute name="pattern" required="false">
        <p>A formatting layout identifying the various information fields
        from the request and response to be logged, or the word
        <code>common</code> or <code>combined</code> to select a
        standard format.  See below for more information on configuring
        this attribute.</p>
      </attribute>

      <attribute name="encoding" required="false">
        <p>Character set used to write the log file. An empty string means
        to use the system default character set. Default value: use the
        system default character set.
        </p>
      </attribute>

      <attribute name="locale" required="false">
        <p>The locale used to format timestamps in the access log
           lines. Any timestamps configured using an
           explicit SimpleDateFormat pattern (<code>%{xxx}t</code>)
           are formatted in this locale. By default the
           default locale of the Java process is used. Switching the
           locale after the AccessLogValve is initialized is not supported.
           Any timestamps using the common log format
           (<code>CLF</code>) are always formatted in the locale
           <code>en_US</code>.
        </p>
      </attribute>

      <attribute name="requestAttributesEnabled" required="false">
        <p>Set to <code>true</code> to check for the existence of request
        attributes (typically set by the RemoteIpValve and similar) that should
        be used to override the values returned by the request for remote
        address, remote host, server port and protocol. If the attributes are
        not set, or this attribute is set to <code>false</code> then the values
        from the request will be used. If not set, the default value of
        <code>false</code> will be used.</p>
      </attribute>

      <attribute name="conditionIf" required="false">
        <p>Turns on conditional logging. If set, requests will be
           logged only if <code>ServletRequest.getAttribute()</code> is
           not null. For example, if this value is set to
           <code>important</code>, then a particular request will only be logged
           if <code>ServletRequest.getAttribute("important") != null</code>.
           The use of Filters is an easy way to set/unset the attribute
           in the ServletRequest on many different requests.
        </p>
      </attribute>

      <attribute name="conditionUnless" required="false">
        <p>Turns on conditional logging. If set, requests will be
           logged only if <code>ServletRequest.getAttribute()</code> is
           null. For example, if this value is set to
           <code>junk</code>, then a particular request will only be logged
           if <code>ServletRequest.getAttribute("junk") == null</code>.
           The use of Filters is an easy way to set/unset the attribute
           in the ServletRequest on many different requests.
        </p>
      </attribute>

      <attribute name="condition" required="false">
        <p>The same as <code>conditionUnless</code>. This attribute is
           provided for backwards compatibility.
        </p>
      </attribute>

      <attribute name="buffered" required="false">
        <p>Flag to determine if logging will be buffered.
           If set to <code>false</code>, then access logging will be written after each
           request. Default value: <code>true</code>
        </p>
      </attribute>

      <attribute name="resolveHosts" required="false">
        <p>This attribute is no longer supported. Use the connector
        attribute <code>enableLookups</code> instead.</p>
        <p>If you have <code>enableLookups</code> on the connector set to
        <code>true</code> and want to ignore it, use <b>%a</b> instead of
        <b>%h</b> in the value of <code>pattern</code>.</p>
      </attribute>

    </attributes>

    <p>Values for the <code>pattern</code> attribute are made up of literal
    text strings, combined with pattern identifiers prefixed by the "%"
    character to cause replacement by the corresponding variable value from
    the current request and response.  The following pattern codes are
    supported:</p>
    <ul>
    <li><b>%a</b> - Remote IP address</li>
    <li><b>%A</b> - Local IP address</li>
    <li><b>%b</b> - Bytes sent, excluding HTTP headers, or '-' if zero</li>
    <li><b>%B</b> - Bytes sent, excluding HTTP headers</li>
    <li><b>%h</b> - Remote host name (or IP address if
        <code>enableLookups</code> for the connector is false)</li>
    <li><b>%H</b> - Request protocol</li>
    <li><b>%l</b> - Remote logical username from identd (always returns
        '-')</li>
    <li><b>%m</b> - Request method (GET, POST, etc.)</li>
    <li><b>%p</b> - Local port on which this request was received</li>
    <li><b>%q</b> - Query string (prepended with a '?' if it exists)</li>
    <li><b>%r</b> - First line of the request (method and request URI)</li>
    <li><b>%s</b> - HTTP status code of the response</li>
    <li><b>%S</b> - User session ID</li>
    <li><b>%t</b> - Date and time, in Common Log Format</li>
    <li><b>%u</b> - Remote user that was authenticated (if any), else '-'</li>
    <li><b>%U</b> - Requested URL path</li>
    <li><b>%v</b> - Local server name</li>
    <li><b>%D</b> - Time taken to process the request, in millis</li>
    <li><b>%T</b> - Time taken to process the request, in seconds</li>
    <li><b>%F</b> - Time taken to commit the response, in millis</li>
    <li><b>%I</b> - Current request thread name (can compare later with stacktraces)</li>
    </ul>

    <p>
    There is also support to write information incoming or outgoing
    headers, cookies, session or request attributes and special
    timestamp formats.
    It is modeled after the
    <a href="http://httpd.apache.org/">Apache HTTP Server</a> log configuration
    syntax:
    </p>
    <ul>
    <li><b><code>%{xxx}i</code></b> for incoming headers</li>
    <li><b><code>%{xxx}o</code></b> for outgoing response headers</li>
    <li><b><code>%{xxx}c</code></b> for a specific cookie</li>
    <li><b><code>%{xxx}r</code></b> xxx is an attribute in the ServletRequest</li>
    <li><b><code>%{xxx}s</code></b> xxx is an attribute in the HttpSession</li>
    <li><b><code>%{xxx}t</code></b> xxx is an enhanced SimpleDateFormat pattern</li>
    </ul>

    <p>All formats supported by SimpleDateFormat are allowed in <code>%{xxx}t</code>.
    In addition the following extensions have been added:</p>
    <ul>
    <li><b><code>sec</code></b> - number of seconds since the epoch</li>
    <li><b><code>msec</code></b> - number of milliseconds since the epoch</li>
    <li><b><code>msec_frac</code></b> - millisecond fraction</li>
    </ul>
    <p>These formats can not be mixed with SimpleDateFormat formats in the same format
    token.</p>

    <p>Furthermore one can define whether to log the timestamp for the request start
    time or the response finish time:</p>
    <ul>
    <li><b><code>begin</code></b> or prefix <b><code>begin:</code></b> chooses
    the request start time</li>
    <li><b><code>end</code></b> or prefix <b><code>end:</code></b> chooses
    the response finish time</li>
    </ul>
    <p>By adding multiple <code>%{xxx}t</code> tokens to the pattern, one can
    also log both timestamps.</p>

    <p>The shorthand pattern <code>pattern=&quot;common&quot;</code>
    corresponds to the Common Log Format defined by
    <strong>'%h %l %u %t &quot;%r&quot; %s %b'</strong>.</p>

    <p>The shorthand pattern <code>pattern=&quot;combined&quot;</code>
    appends the values of the <code>Referer</code> and <code>User-Agent</code>
    headers, each in double quotes, to the <code>common</code> pattern.</p>

  </subsection>

</subsection>


<subsection name="Extended Access Log Valve">

  <subsection name="Introduction">

    <p>The <strong>Extended Access Log Valve</strong> extends the
    <a href="#Access_Log_Valve">Access Log Valve</a> class, and so
    uses the same self-contained logging logic.  This means it
    implements many of the same file handling attributes.  The main
    difference to the standard <code>AccessLogValve</code> is that
    <code>ExtendedAccessLogValve</code> creates log files which
    conform to the the Working Draft for the
    <a href="http://www.w3.org/TR/WD-logfile.html">Extended Log File Format</a>
    defined by the W3C.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Extended Access Log Valve</strong> supports all
    configuration attributes of the standard
    <a href="#Access_Log_Valve">Access Log Valve.</a> Only the
    values used for <code>className</code> and <code>pattern</code> differ.</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.ExtendedAccessLogValve</strong> to
        use the extended access log valve.</p>
      </attribute>

      <attribute name="pattern" required="false">
        <p>A formatting layout identifying the various information fields
        from the request and response to be logged.
        See below for more information on configuring this attribute.</p>
      </attribute>

    </attributes>

    <p>Values for the <code>pattern</code> attribute are made up of
    format tokens. Some of the tokens need an additional prefix. Possible
    prefixes are <code>c</code> for "client", <code>s</code> for "server",
    <code>cs</code> for "client to server", <code>sc</code> for
    "server to client" or <code>x</code> for "application specific".
    Furthermore some tokens are completed by an additional selector.
    See the <a href="http://www.w3.org/TR/WD-logfile.html">W3C specification</a>
    for more information about the format.</p>

    <p>The following format tokens are supported:</p>
    <ul>
    <li><b>bytes</b> - Bytes sent, excluding HTTP headers, or '-' if zero</li>
    <li><b>c-dns</b> - Remote host name (or IP address if
        <code>enableLookups</code> for the connector is false)</li>
    <li><b>c-ip</b> - Remote IP address</li>
    <li><b>cs-method</b> - Request method (GET, POST, etc.)</li>
    <li><b>cs-uri</b> - Request URI</li>
    <li><b>cs-uri-query</b> - Query string (prepended with a '?' if it exists)</li>
    <li><b>cs-uri-stem</b> - Requested URL path</li>
    <li><b>date</b> - The date in yyyy-mm-dd format for GMT</li>
    <li><b>s-dns</b> - Local host name</li>
    <li><b>s-ip</b> - Local IP address</li>
    <li><b>sc-status</b> - HTTP status code of the response</li>
    <li><b>time</b> - Time the request was served in HH:mm:ss format for GMT</li>
    <li><b>time-taken</b> - Time (in seconds as floating point) taken to serve the request</li>
    <li><b>x-threadname</b> - Current request thread name (can compare later with stacktraces)</li>
    </ul>

    <p>For any of the <code>x-H(XXX)</code> the following method will be called from the
    HttpServletRequest object:</p>
    <ul>
    <li><b><code>x-H(authType)</code></b>: getAuthType </li>
    <li><b><code>x-H(characterEncoding)</code></b>: getCharacterEncoding </li>
    <li><b><code>x-H(contentLength)</code></b>: getContentLength </li>
    <li><b><code>x-H(locale)</code></b>:  getLocale</li>
    <li><b><code>x-H(protocol)</code></b>: getProtocol </li>
    <li><b><code>x-H(remoteUser)</code></b>:  getRemoteUser</li>
    <li><b><code>x-H(requestedSessionId)</code></b>: getRequestedSessionId</li>
    <li><b><code>x-H(requestedSessionIdFromCookie)</code></b>:
                     isRequestedSessionIdFromCookie </li>
    <li><b><code>x-H(requestedSessionIdValid)</code></b>:
                     isRequestedSessionIdValid</li>
    <li><b><code>x-H(scheme)</code></b>:  getScheme</li>
    <li><b><code>x-H(secure)</code></b>:  isSecure</li>
    </ul>

    <p>
    There is also support to write information about headers
    cookies, context, request or session attributes and request
    parameters.
    </p>
    <ul>
    <li><b><code>cs(XXX)</code></b> for incoming request headers with name XXX</li>
    <li><b><code>sc(XXX)</code></b> for outgoing response headers with name XXX</li>
    <li><b><code>x-A(XXX)</code></b> for the servlet context attribute with name XXX</li>
    <li><b><code>x-C(XXX)</code></b> for the first cookie with name XXX</li>
    <li><b><code>x-O(XXX)</code></b> for a concatenation of all outgoing response headers with name XXX</li>
    <li><b><code>x-P(XXX)</code></b> for the URL encoded (using UTF-8) request parameter with name XXX</li>
    <li><b><code>x-R(XXX)</code></b> for the request attribute with name XXX</li>
    <li><b><code>x-S(XXX)</code></b> for the session attribute with name XXX</li>
    </ul>

  </subsection>

</subsection>

</section>


<section name="Access Control">


<subsection name="Remote Address Filter">

  <subsection name="Introduction">

    <p>The <strong>Remote Address Filter</strong> allows you to compare the
    IP address of the client that submitted this request against one or more
    <em>regular expressions</em>, and either allow the request to continue
    or refuse to process the request from this client.  A Remote Address
    Filter can be associated with any Catalina container
    (<a href="engine.html">Engine</a>, <a href="host.html">Host</a>, or
    <a href="context.html">Context</a>), and must accept any request
    presented to this container for processing before it will be passed on.</p>

    <p>The syntax for <em>regular expressions</em> is different than that for
    'standard' wildcard matching. Tomcat uses the <code>java.util.regex</code>
    package. Please consult the Java documentation for details of the
    expressions supported.</p>

    <p>Optionally one can append the server connector port separated with a
    comma (";") to allow different expressions for each connector.</p>

    <p>The behavior when a request is refused can be changed
    to not deny but instead set an invalid <code>authentication</code>
    header. This is useful in combination with the context attribute
    <code>preemptiveAuthentication="true"</code>.</p>

    <p><strong>Note:</strong> There is a caveat when using this valve with
    IPv6 addresses. Format of the IP address that this valve is processing
    depends on the API that was used to obtain it. If the address was obtained
    from Java socket using Inet6Address class, its format will be
    <code>x:x:x:x:x:x:x:x</code>. That is, the IP address for localhost
    will be <code>0:0:0:0:0:0:0:1</code> instead of the more widely used
    <code>::1</code>. Consult your access logs for the actual value.</p>

    <p>See also: <a href="#Remote_Host_Filter">Remote Host Filter</a>,
    <a href="#Remote_IP_Valve">Remote IP Valve</a>.</p>
  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Remote Address Filter</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.RemoteAddrValve</strong>.</p>
      </attribute>

      <attribute name="allow" required="false">
        <p>A regular expression (using <code>java.util.regex</code>) that the
        remote client&apos;s IP address is compared to.  If this attribute
        is specified, the remote address MUST match for this request to be
        accepted.  If this attribute is not specified, all requests will be
        accepted UNLESS the remote address matches a <code>deny</code>
        pattern.</p>
      </attribute>

      <attribute name="deny" required="false">
        <p>A regular expression (using <code>java.util.regex</code>) that the
        remote client's IP address is compared to.  If this attribute
        is specified, the remote address MUST NOT match for this request to be
        accepted.  If this attribute is not specified, request acceptance is
        governed solely by the <code>allow</code> attribute.</p>
      </attribute>

      <attribute name="denyStatus" required="false">
        <p>HTTP response status code that is used when rejecting denied
        request. The default value is <code>403</code>. For example,
        it can be set to the value <code>404</code>.</p>
      </attribute>

      <attribute name="addConnectorPort" required="false">
        <p>Append the server connector port to the client IP address separated
        with a semicolon (";"). If this is set to <code>true</code>, the
        expressions configured with <code>allow</code> and
        <code>deny</code> is compared against <code>ADDRESS;PORT</code>
        where <code>ADDRESS</code> is the client IP address and
        <code>PORT</code> is the Tomcat connector port which received the
        request. The default value is <code>false</code>.</p>
      </attribute>

      <attribute name="invalidAuthenticationWhenDeny" required="false">
        <p>When a request should be denied, do not deny but instead
        set an invalid <code>authentication</code> header. This only works
        if the context has the attribute <code>preemptiveAuthentication="true"</code>
        set. An already existing <code>authentication</code> header will not be
        overwritten. In effect this will trigger authentication instead of deny
        even if the application does not have a security constraint configured.</p>
        <p>This can be combined with <code>addConnectorPort</code> to trigger authentication
        depending on the client and the connector that is used to access an application.</p>
      </attribute>

    </attributes>

  </subsection>

  <subsection name="Example 1" anchor="Remote_Address_Valve/Example_localhost">
    <p>To allow access only for the clients connecting from localhost:</p>
    <source><![CDATA[<Valve className="org.apache.catalina.valves.RemoteAddrValve"
   allow="127\.\d+\.\d+\.\d+|::1|0:0:0:0:0:0:0:1"/>]]></source>
  </subsection>

  <subsection name="Example 2" anchor="Remote_Address_Valve/Example_localhost_port">
    <p>To allow unrestricted access for the clients connecting from localhost
    but for all other clients only to port 8443:</p>
    <source><![CDATA[<Valve className="org.apache.catalina.valves.RemoteAddrValve"
   addConnectorPort="true"
   allow="127\.\d+\.\d+\.\d+;\d*|::1;\d*|0:0:0:0:0:0:0:1;\d*|.*;8443"/>]]></source>
  </subsection>

  <subsection name="Example 3" anchor="Remote_Address_Valve/Example_port_auth">
    <p>To allow unrestricted access to port 8009, but trigger basic
    authentication if the application is accessed on another port:</p>
<source><![CDATA[<Context>
  ...
  <Valve className="org.apache.catalina.valves.RemoteAddrValve"
         addConnectorPort="true"
         invalidAuthenticationWhenDeny="true"
         allow=".*;8009"/>
  <Valve className="org.apache.catalina.authenticator.BasicAuthenticator" />
  ...
</Context>]]></source>
  </subsection>

</subsection>


<subsection name="Remote Host Filter">

  <subsection name="Introduction">

    <p>The <strong>Remote Host Filter</strong> allows you to compare the
    hostname of the client that submitted this request against one or more
    <em>regular expressions</em>, and either allow the request to continue
    or refuse to process the request from this client.  A Remote Host
    Filter can be associated with any Catalina container
    (<a href="engine.html">Engine</a>, <a href="host.html">Host</a>, or
    <a href="context.html">Context</a>), and must accept any request
    presented to this container for processing before it will be passed on.</p>

    <p>The syntax for <em>regular expressions</em> is different than that for
    'standard' wildcard matching. Tomcat uses the <code>java.util.regex</code>
    package. Please consult the Java documentation for details of the
    expressions supported.</p>

    <p>Optionally one can append the server connector port separated with a
    comma (";") to allow different expressions for each connector.</p>

    <p>The behavior when a request is refused can be changed
    to not deny but instead set an invalid <code>authentication</code>
    header. This is useful in combination with the context attribute
    <code>preemptiveAuthentication="true"</code>.</p>

    <p><strong>Note:</strong> This filter processes the value returned by
    method <code>ServletRequest.getRemoteHost()</code>. To allow the method
    to return proper host names, you have to enable "DNS lookups" feature on
    a <strong>Connector</strong>.</p>

    <p>See also: <a href="#Remote_Address_Filter">Remote Address Filter</a>,
    <a href="http.html">HTTP Connector</a> configuration.</p>
  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Remote Host Filter</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.RemoteHostValve</strong>.</p>
      </attribute>

      <attribute name="allow" required="false">
        <p>A regular expression (using <code>java.util.regex</code>) that the
        remote client&apos;s hostname is compared to.  If this attribute
        is specified, the remote hostname MUST match for this request to be
        accepted.  If this attribute is not specified, all requests will be
        accepted UNLESS the remote hostname matches a <code>deny</code>
        pattern.</p>
      </attribute>

      <attribute name="deny" required="false">
        <p>A regular expression (using <code>java.util.regex</code>) that the
        remote client's hostname is compared to.  If this attribute
        is specified, the remote hostname MUST NOT match for this request to be
        accepted.  If this attribute is not specified, request acceptance is
        governed solely by the <code>allow</code> attribute.</p>
      </attribute>

      <attribute name="denyStatus" required="false">
        <p>HTTP response status code that is used when rejecting denied
        request. The default value is <code>403</code>. For example,
        it can be set to the value <code>404</code>.</p>
      </attribute>

      <attribute name="addConnectorPort" required="false">
        <p>Append the server connector port to the client hostname separated
        with a comma (";"). If this is set to <code>true</code>, the
        expressions configured with <code>allow</code> and
        <code>deny</code> is compared against <code>HOSTNAME;PORT</code>
        where <code>HOSTNAME</code> is the client hostname and
        <code>PORT</code> is the Tomcat connector port which received the
        request. The default value is <code>false</code>.</p>
      </attribute>

      <attribute name="invalidAuthenticationWhenDeny" required="false">
        <p>When a request should be denied, do not deny but instead
        set an invalid <code>authentication</code> header. This only works
        if the context has the attribute <code>preemptiveAuthentication="true"</code>
        set. An already existing <code>authentication</code> header will not be
        overwritten. In effect this will trigger authentication instead of deny
        even if the application does not have a security constraint configured.</p>
        <p>This can be combined with <code>addConnectorPort</code> to trigger authentication
        depending on the client and the connector that is used to access an application.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


</section>


<section name="Proxies Support">

<subsection name="Remote IP Valve">

  <subsection name="Introduction">

    <p>Tomcat port of
    <a href="http://httpd.apache.org/docs/trunk/mod/mod_remoteip.html">mod_remoteip</a>,
    this valve replaces the apparent client remote IP address and hostname for
    the request with the IP address list presented by a proxy or a load balancer
    via a request headers (e.g. &quot;X-Forwarded-For&quot;).</p>

    <p>Another feature of this valve is to replace the apparent scheme
    (http/https), server port and <code>request.secure</code> with the scheme presented
    by a proxy or a load balancer via a request header
    (e.g. &quot;X-Forwarded-Proto&quot;).</p>

    <p>This Valve may be used at the <code>Engine</code>, <code>Host</code> or
    <code>Context</code> level as required. Normally, this Valve would be used
    at the <code>Engine</code> level.</p>

    <p>If used in conjunction with Remote Address/Host valves then this valve
    should be defined first to ensure that the correct client IP address is
    presented to the Remote Address/Host valves.</p>

    <p><strong>Note:</strong> By default this valve has no effect on the
    values that are written into access log. The original values are restored
    when request processing leaves the valve and that always happens earlier
    than access logging. To pass the remote address, remote host, server port
    and protocol values set by this valve to the access log,
    they are put into request attributes. Publishing these values here
    is enabled by default, but <code>AccessLogValve</code> should be explicitly
    configured to use them. See documentation for
    <code>requestAttributesEnabled</code> attribute of
    <code>AccessLogValve</code>.</p>

    <p>The names of request attributes that are set by this valve
    and can be used by access logging are the following:</p>

    <ul>
      <li><code>org.apache.catalina.AccessLog.RemoteAddr</code></li>
      <li><code>org.apache.catalina.AccessLog.RemoteHost</code></li>
      <li><code>org.apache.catalina.AccessLog.Protocol</code></li>
      <li><code>org.apache.catalina.AccessLog.ServerPort</code></li>
      <li><code>org.apache.tomcat.remoteAddr</code></li>
    </ul>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Remote IP Valve</strong> supports the
    following configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.RemoteIpValve</strong>.</p>
      </attribute>

      <attribute name="remoteIpHeader" required="false">
        <p>Name of the HTTP Header read by this valve that holds the list of
        traversed IP addresses starting from the requesting client. If not
        specified, the default of <code>x-forwarded-for</code> is used.</p>
      </attribute>

      <attribute name="internalProxies" required="false">
        <p>Regular expression (using <code>java.util.regex</code>) that a
        proxy&apos;s IP address must match to be considered an internal proxy.
        Internal proxies that appear in the <strong>remoteIpHeader</strong> will
        be trusted and will not appear in the <strong>proxiesHeader</strong>
        value. If not specified the default value of <code>
        10\.\d{1,3}\.\d{1,3}\.\d{1,3}|192\.168\.\d{1,3}\.\d{1,3}|169\.254\.\d{1,3}\.\d{1,3}|127\.\d{1,3}\.\d{1,3}\.\d{1,3}
        </code> will be used.</p>
      </attribute>

      <attribute name="proxiesHeader" required="false">
        <p>Name of the HTTP header created by this valve to hold the list of
        proxies that have been processed in the incoming
        <strong>remoteIpHeader</strong>. If not specified, the default of
        <code>x-forwarded-by</code> is used.</p>
      </attribute>

      <attribute name="requestAttributesEnabled" required="false">
        <p>Set to <code>true</code> to set the request attributes used by
        AccessLog implementations to override the values returned by the
        request for remote address, remote host, server port and protocol.
        Request attributes are also used to enable the forwarded remote address
        to be displayed on the status page of the Manager web application.
        If not set, the default value of <code>true</code> will be used.</p>
      </attribute>

      <attribute name="trustedProxies" required="false">
        <p>Regular expression (using <code>java.util.regex</code>) that a
        proxy&apos;s IP address must match to be considered an trusted proxy.
        Trusted proxies that appear in the <strong>remoteIpHeader</strong> will
        be trusted and will appear in the <strong>proxiesHeader</strong> value.
        If not specified, no proxies will be trusted.</p>
      </attribute>

      <attribute name="protocolHeader" required="false">
        <p>Name of the HTTP Header read by this valve that holds the protocol
        used by the client to connect to the proxy. If not specified, the
        default of <code>null</code> is used.</p>
      </attribute>

      <attribute name="portHeader" required="false">
        <p>Name of the HTTP Header read by this valve that holds the port
        used by the client to connect to the proxy. If not specified, the
        default of <code>null</code> is used.</p>
      </attribute>

      <attribute name="protocolHeaderHttpsValue" required="false">
        <p>Value of the <strong>protocolHeader</strong> to indicate that it is
        an HTTPS request. If not specified, the default of <code>https</code> is
        used.</p>
      </attribute>

      <attribute name="httpServerPort" required="false">
         <p>Value returned by <code>ServletRequest.getServerPort()</code>
         when the <strong>protocolHeader</strong> indicates <code>http</code>
         protocol and no <strong>portHeader</strong> is present. If not
         specified, the default of <code>80</code> is used.</p>
      </attribute>

      <attribute name="httpsServerPort" required="false">
         <p>Value returned by <code>ServletRequest.getServerPort()</code>
         when the <strong>protocolHeader</strong> indicates <code>https</code>
         protocol and no <strong>portHeader</strong> is present. If not
         specified, the default of <code>443</code> is used.</p>
      </attribute>

      <attribute name="changeLocalPort" required="false">
        <p>If <code>true</code>, the value returned by
        <code>ServletRequest.getLocalPort()</code> and
        <code>ServletRequest.getServerPort()</code> is modified by the this
        valve. If not specified, the default of <code>false</code> is used.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


<subsection name="SSL Valve">

  <subsection name="Introduction">

    <p>When using mod_proxy_http, the client SSL information is not included in
    the protocol (unlike mod_jk and mod_proxy_ajp). To make the client SSL
    information available to Tomcat, some additional configuration is required.
    In httpd, mod_headers is used to add the SSL information as HTTP headers. In
    Tomcat, this valve is used to read the information from the HTTP headers and
    insert it into the request.</p>

    <p>Note: Ensure that the headers are always set by httpd for all requests to
    prevent a client spoofing SSL information by sending fake headers.</p>

    <p>To configure httpd to set the necessary headers, add the following:</p>
<source>&lt;IfModule ssl_module&gt;
  RequestHeader set SSL_CLIENT_CERT "%{SSL_CLIENT_CERT}s"
  RequestHeader set SSL_CIPHER "%{SSL_CIPHER}s"
  RequestHeader set SSL_SESSION_ID "%{SSL_SESSION_ID}s"
  RequestHeader set SSL_CIPHER_USEKEYSIZE "%{SSL_CIPHER_USEKEYSIZE}s"
&lt;/IfModule&gt;</source>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>SSL Valve</strong> supports the following configuration
    attribute:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.SSLValve</strong>.
        </p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


</section>


<section name="Single Sign On Valve">

  <subsection name="Introduction">

    <p>The <em>Single Sign On Valve</em> is utilized when you wish to give users
    the ability to sign on to any one of the web applications associated with
    your virtual host, and then have their identity recognized by all other
    web applications on the same virtual host.</p>

    <p>See the <a href="host.html#Single_Sign_On">Single Sign On</a> special
    feature on the <strong>Host</strong> element for more information.</p>

  </subsection>


  <subsection name="Attributes">

    <p>The <strong>Single Sign On</strong> Valve supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.SingleSignOn</strong>.</p>
      </attribute>

      <attribute name="requireReauthentication" required="false">
        <p>Default false. Flag to determine whether each request needs to be
        reauthenticated to the security <strong>Realm</strong>. If "true", this
        Valve uses cached security credentials (username and password) to
        reauthenticate to the <strong>Realm</strong> each request associated
        with an SSO session.  If "false", the Valve can itself authenticate
        requests based on the presence of a valid SSO cookie, without
        rechecking with the <strong>Realm</strong>.</p>
      </attribute>

      <attribute name="cookieDomain" required="false">
        <p>Sets the host domain to be used for sso cookies.</p>
      </attribute>

    </attributes>

  </subsection>


</section>


<section name="Authentication">

<p>The valves in this section implement
<strong>org.apache.catalina.Authenticator</strong> interface.</p>

<subsection name="Basic Authenticator Valve">

  <subsection name="Introduction">

    <p>The <strong>Basic Authenticator Valve</strong> is automatically added to
    any <a href="context.html">Context</a> that is configured to use BASIC
    authentication.</p>

    <p>If any non-default settings are required, the valve may be configured
    within <a href="context.html">Context</a> element with the required
    values.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Basic Authenticator Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="alwaysUseSession" required="false">
        <p>Should a session always be used once a user is authenticated? This
        may offer some performance benefits since the session can then be used
        to cache the authenticated Principal, hence removing the need to
        authenticate the user via the Realm on every request. This may be of
        help for combinations such as BASIC authentication used with the
        JNDIRealm or DataSourceRealms. However there will also be the
        performance cost of creating and GC'ing the session. If not set, the
        default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="cache" required="false">
        <p>Should we cache authenticated Principals if the request is part of an
        HTTP session? If not specified, the default value of <code>true</code>
        will be used.</p>
      </attribute>

      <attribute name="changeSessionIdOnAuthentication" required="false">
        <p>Controls if the session ID is changed if a session exists at the
        point where users are authenticated. This is to prevent session fixation
        attacks. If not set, the default value of <code>true</code> will be
        used.</p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.BasicAuthenticator</strong>.</p>
      </attribute>

      <attribute name="disableProxyCaching" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers but will also cause secured pages to be
        cached by proxies which will almost certainly be a security issue.
        <code>securePagesWithPragma</code> offers an alternative, secure,
        workaround for browser caching issues. If not set, the default value of
        <code>true</code> will be used.</p>
      </attribute>

      <attribute name="securePagesWithPragma" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers by using
        <code>Cache-Control: private</code> rather than the default of
        <code>Pragma: No-cache</code> and <code>Cache-control: No-cache</code>.
        If not set, the default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="secureRandomAlgorithm" required="false">
        <p>Name of the algorithm to use to create the
        <code>java.security.SecureRandom</code> instances that generate session
        IDs. If an invalid algorithm and/or provider is specified, the platform
        default provider and the default algorithm will be used. If not
        specified, the default algorithm of SHA1PRNG will be used. If the
        default algorithm is not supported, the platform default will be used.
        To specify that the platform default should be used, do not set the
        secureRandomProvider attribute and set this attribute to the empty
        string.</p>
      </attribute>

      <attribute name="secureRandomClass" required="false">
        <p>Name of the Java class that extends
        <code>java.security.SecureRandom</code> to use to generate SSO session
        IDs. If not specified, the default value is
        <code>java.security.SecureRandom</code>.</p>
      </attribute>

      <attribute name="secureRandomProvider" required="false">
        <p>Name of the provider to use to create the
        <code>java.security.SecureRandom</code> instances that generate SSO
        session IDs. If an invalid algorithm and/or provider is specified, the
        platform default provider and the default algorithm will be used. If not
        specified, the platform default provider will be used.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


<subsection name="Digest Authenticator Valve">

  <subsection name="Introduction">

    <p>The <strong>Digest Authenticator Valve</strong> is automatically added to
    any <a href="context.html">Context</a> that is configured to use DIGEST
    authentication.</p>

    <p>If any non-default settings are required, the valve may be configured
    within <a href="context.html">Context</a> element with the required
    values.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Digest Authenticator Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="alwaysUseSession" required="false">
        <p>Should a session always be used once a user is authenticated? This
        may offer some performance benefits since the session can then be used
        to cache the authenticated Principal, hence removing the need to
        authenticate the user via the Realm on every request. This may be of
        help for combinations such as BASIC authentication used with the
        JNDIRealm or DataSourceRealms. However there will also be the
        performance cost of creating and GC'ing the session. If not set, the
        default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="cache" required="false">
        <p>Should we cache authenticated Principals if the request is part of an
        HTTP session? If not specified, the default value of <code>false</code>
        will be used.</p>
      </attribute>

      <attribute name="changeSessionIdOnAuthentication" required="false">
        <p>Controls if the session ID is changed if a session exists at the
        point where users are authenticated. This is to prevent session fixation
        attacks. If not set, the default value of <code>true</code> will be
        used.</p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.DigestAuthenticator</strong>.</p>
      </attribute>

      <attribute name="disableProxyCaching" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers but will also cause secured pages to be
        cached by proxies which will almost certainly be a security issue.
        <code>securePagesWithPragma</code> offers an alternative, secure,
        workaround for browser caching issues. If not set, the default value of
        <code>true</code> will be used.</p>
      </attribute>

      <attribute name="key" required="false">
        <p>The secret key used by digest authentication. If not set, a secure
        random value is generated. This should normally only be set when it is
        necessary to keep key values constant either across server restarts
        and/or across a cluster.</p>
      </attribute>

      <attribute name="nonceCacheSize" required="false">
        <p>To protect against replay attacks, the DIGEST authenticator tracks
        server nonce and nonce count values. This attribute controls the size
        of that cache. If not specified, the default value of 1000 is used.</p>
      </attribute>

      <attribute name="nonceCountWindowSize" required="false">
        <p>Client requests may be processed out of order which in turn means
        that the nonce count values may be processed out of order. To prevent
        authentication failures when nonce counts are presented out of order
        the authenticator tracks a window of nonce count values. This attribute
        controls how big that window is. If not specified, the default value of
        100 is used.</p>
      </attribute>

      <attribute name="nonceValidity" required="false">
        <p>The time, in milliseconds, that a server generated nonce will be
        considered valid for use in authentication. If not specified, the
        default value of 300000 (5 minutes) will be used.</p>
      </attribute>

      <attribute name="opaque" required="false">
        <p>The opaque server string used by digest authentication. If not set, a
        random value is generated. This should normally only be set when it is
        necessary to keep opaque values constant either across server restarts
        and/or across a cluster.</p>
      </attribute>

      <attribute name="securePagesWithPragma" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers by using
        <code>Cache-Control: private</code> rather than the default of
        <code>Pragma: No-cache</code> and <code>Cache-control: No-cache</code>.
        If not set, the default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="secureRandomAlgorithm" required="false">
        <p>Name of the algorithm to use to create the
        <code>java.security.SecureRandom</code> instances that generate session
        IDs. If an invalid algorithm and/or provider is specified, the platform
        default provider and the default algorithm will be used. If not
        specified, the default algorithm of SHA1PRNG will be used. If the
        default algorithm is not supported, the platform default will be used.
        To specify that the platform default should be used, do not set the
        secureRandomProvider attribute and set this attribute to the empty
        string.</p>
      </attribute>

      <attribute name="secureRandomClass" required="false">
        <p>Name of the Java class that extends
        <code>java.security.SecureRandom</code> to use to generate SSO session
        IDs. If not specified, the default value is
        <code>java.security.SecureRandom</code>.</p>
      </attribute>

      <attribute name="secureRandomProvider" required="false">
        <p>Name of the provider to use to create the
        <code>java.security.SecureRandom</code> instances that generate SSO
        session IDs. If an invalid algorithm and/or provider is specified, the
        platform default provider and the default algorithm will be used. If not
        specified, the platform default provider will be used.</p>
      </attribute>

      <attribute name="validateUri" required="false">
        <p>Should the URI be validated as required by RFC2617? If not specified,
        the default value of <code>true</code> will be used. This should
        normally only be set when Tomcat is located behind a reverse proxy and
        the proxy is modifying the URI passed to Tomcat such that DIGEST
        authentication always fails.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


<subsection name="Form Authenticator Valve">

  <subsection name="Introduction">

    <p>The <strong>Form Authenticator Valve</strong> is automatically added to
    any <a href="context.html">Context</a> that is configured to use FORM
    authentication.</p>

    <p>If any non-default settings are required, the valve may be configured
    within <a href="context.html">Context</a> element with the required
    values.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Form Authenticator Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="changeSessionIdOnAuthentication" required="false">
        <p>Controls if the session ID is changed if a session exists at the
        point where users are authenticated. This is to prevent session fixation
        attacks. If not set, the default value of <code>true</code> will be
        used.</p>
      </attribute>

      <attribute name="characterEncoding" required="false">
        <p>Character encoding to use to read the username and password parameters
        from the request. If not set, the encoding of the request body will be
        used.</p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.FormAuthenticator</strong>.</p>
      </attribute>

      <attribute name="disableProxyCaching" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers but will also cause secured pages to be
        cached by proxies which will almost certainly be a security issue.
        <code>securePagesWithPragma</code> offers an alternative, secure,
        workaround for browser caching issues. If not set, the default value of
        <code>true</code> will be used.</p>
      </attribute>

      <attribute name="landingPage" required="false">
        <p>Controls the behavior of the FORM authentication process if the
        process is misused, for example by directly requesting the login page
        or delaying logging in for so long that the session expires. If this
        attribute is set, rather than returning an error response code, Tomcat
        will redirect the user to the specified landing page if the login form
        is submitted with valid credentials. For the login to be processed, the
        landing page must be a protected resource (i.e. one that requires
        authentication). If the landing page does not require authentication
        then the user will not be logged in and will be prompted for their
        credentials again when they access a protected page.</p>
      </attribute>

      <attribute name="securePagesWithPragma" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers by using
        <code>Cache-Control: private</code> rather than the default of
        <code>Pragma: No-cache</code> and <code>Cache-control: No-cache</code>.
        If not set, the default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="secureRandomAlgorithm" required="false">
        <p>Name of the algorithm to use to create the
        <code>java.security.SecureRandom</code> instances that generate session
        IDs. If an invalid algorithm and/or provider is specified, the platform
        default provider and the default algorithm will be used. If not
        specified, the default algorithm of SHA1PRNG will be used. If the
        default algorithm is not supported, the platform default will be used.
        To specify that the platform default should be used, do not set the
        secureRandomProvider attribute and set this attribute to the empty
        string.</p>
      </attribute>

      <attribute name="secureRandomClass" required="false">
        <p>Name of the Java class that extends
        <code>java.security.SecureRandom</code> to use to generate SSO session
        IDs. If not specified, the default value is
        <code>java.security.SecureRandom</code>.</p>
      </attribute>

      <attribute name="secureRandomProvider" required="false">
        <p>Name of the provider to use to create the
        <code>java.security.SecureRandom</code> instances that generate SSO
        session IDs. If an invalid algorithm and/or provider is specified, the
        platform default provider and the default algorithm will be used. If not
        specified, the platform default provider will be used.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


<subsection name="SSL Authenticator Valve">

  <subsection name="Introduction">

    <p>The <strong>SSL Authenticator Valve</strong> is automatically added to
    any <a href="context.html">Context</a> that is configured to use SSL
    authentication.</p>

    <p>If any non-default settings are required, the valve may be configured
    within <a href="context.html">Context</a> element with the required
    values.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>SSL Authenticator Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="cache" required="false">
        <p>Should we cache authenticated Principals if the request is part of an
        HTTP session? If not specified, the default value of <code>true</code>
        will be used.</p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.SSLAuthenticator</strong>.</p>
      </attribute>

      <attribute name="changeSessionIdOnAuthentication" required="false">
        <p>Controls if the session ID is changed if a session exists at the
        point where users are authenticated. This is to prevent session fixation
        attacks. If not set, the default value of <code>true</code> will be
        used.</p>
      </attribute>

      <attribute name="disableProxyCaching" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers but will also cause secured pages to be
        cached by proxies which will almost certainly be a security issue.
        <code>securePagesWithPragma</code> offers an alternative, secure,
        workaround for browser caching issues. If not set, the default value of
        <code>true</code> will be used.</p>
      </attribute>

      <attribute name="securePagesWithPragma" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers by using
        <code>Cache-Control: private</code> rather than the default of
        <code>Pragma: No-cache</code> and <code>Cache-control: No-cache</code>.
        If not set, the default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="secureRandomAlgorithm" required="false">
        <p>Name of the algorithm to use to create the
        <code>java.security.SecureRandom</code> instances that generate session
        IDs. If an invalid algorithm and/or provider is specified, the platform
        default provider and the default algorithm will be used. If not
        specified, the default algorithm of SHA1PRNG will be used. If the
        default algorithm is not supported, the platform default will be used.
        To specify that the platform default should be used, do not set the
        secureRandomProvider attribute and set this attribute to the empty
        string.</p>
      </attribute>

      <attribute name="secureRandomClass" required="false">
        <p>Name of the Java class that extends
        <code>java.security.SecureRandom</code> to use to generate SSO session
        IDs. If not specified, the default value is
        <code>java.security.SecureRandom</code>.</p>
      </attribute>

      <attribute name="secureRandomProvider" required="false">
        <p>Name of the provider to use to create the
        <code>java.security.SecureRandom</code> instances that generate SSO
        session IDs. If an invalid algorithm and/or provider is specified, the
        platform default provider and the default algorithm will be used. If not
        specified, the platform default provider will be used.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


<subsection name="SPNEGO Valve">

  <subsection name="Introduction">

    <p>The <strong>SPNEGO Authenticator Valve</strong> is automatically added to
    any <a href="context.html">Context</a> that is configured to use SPNEGO
    authentication.</p>

    <p>If any non-default settings are required, the valve may be configured
    within <a href="context.html">Context</a> element with the required
    values.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>SPNEGO Authenticator Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="alwaysUseSession" required="false">
        <p>Should a session always be used once a user is authenticated? This
        may offer some performance benefits since the session can then be used
        to cache the authenticated Principal, hence removing the need to
        authenticate the user on every request. This will also help with clients
        that assume that the server will cache the authenticated user. However
        there will also be the performance cost of creating and GC'ing the
        session. For an alternative solution see
        <code>noKeepAliveUserAgents</code>. If not set, the default value of
        <code>false</code> will be used.</p>
      </attribute>

      <attribute name="cache" required="false">
        <p>Should we cache authenticated Principals if the request is part of an
        HTTP session? If not specified, the default value of <code>true</code>
        will be used.</p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.SpnegoAuthenticator</strong>.
        </p>
      </attribute>

      <attribute name="changeSessionIdOnAuthentication" required="false">
        <p>Controls if the session ID is changed if a session exists at the
        point where users are authenticated. This is to prevent session fixation
        attacks. If not set, the default value of <code>true</code> will be
        used.</p>
      </attribute>

      <attribute name="disableProxyCaching" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers but will also cause secured pages to be
        cached by proxies which will almost certainly be a security issue.
        <code>securePagesWithPragma</code> offers an alternative, secure,
        workaround for browser caching issues. If not set, the default value of
        <code>true</code> will be used.</p>
      </attribute>

      <attribute name="loginConfigName" required="false">
        <p>The name of the JAAS login configuration to be used to login as the
        service. If not specified, the default of
        <code>com.sun.security.jgss.krb5.accept</code> is used.</p>
      </attribute>

      <attribute name="noKeepAliveUserAgents" required="false">
        <p>Some clients (not most browsers) expect the server to cache the
        authenticated user information for a connection and do not resend the
        credentials with every request. Tomcat will not do this unless an HTTP
        session is available. A session will be availble if either the
        application creates one or if <code>alwaysUseSession</code> is enabled
        for this Authenticator.</p>
        <p>As an alternative to creating a session, this attribute may be used
        to define the user agents for which HTTP keep-alive is disabled. This
        means that a connection will only used for a single request and hence
        there is no ability to cache authenticated user information per
        connection. There will be a performance cost in disabling HTTP
        keep-alive.</p>
        <p>The attribute should be a regular expression that matches the entire
        user-agent string, e.g. <code>.*Chrome.*</code>. If not specified, no
        regular expression will be defined and no user agents will have HTTP
        keep-alive disabled.</p>
      </attribute>

      <attribute name="securePagesWithPragma" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers by using
        <code>Cache-Control: private</code> rather than the default of
        <code>Pragma: No-cache</code> and <code>Cache-control: No-cache</code>.
        If not set, the default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="secureRandomAlgorithm" required="false">
        <p>Name of the algorithm to use to create the
        <code>java.security.SecureRandom</code> instances that generate session
        IDs. If an invalid algorithm and/or provider is specified, the platform
        default provider and the default algorithm will be used. If not
        specified, the default algorithm of SHA1PRNG will be used. If the
        default algorithm is not supported, the platform default will be used.
        To specify that the platform default should be used, do not set the
        secureRandomProvider attribute and set this attribute to the empty
        string.</p>
      </attribute>

      <attribute name="secureRandomClass" required="false">
        <p>Name of the Java class that extends
        <code>java.security.SecureRandom</code> to use to generate SSO session
        IDs. If not specified, the default value is
        <code>java.security.SecureRandom</code>.</p>
      </attribute>

      <attribute name="secureRandomProvider" required="false">
        <p>Name of the provider to use to create the
        <code>java.security.SecureRandom</code> instances that generate SSO
        session IDs. If an invalid algorithm and/or provider is specified, the
        platform default provider and the default algorithm will be used. If not
        specified, the platform default provider will be used.</p>
      </attribute>

      <attribute name="storeDelegatedCredential" required="false">
        <p>Controls if the user&apos; delegated credential will be stored in
        the user Principal. If available, the delegated credential will be
        available to applications (e.g. for onward authentication to external
        services) via the <code>org.apache.catalina.realm.GSS_CREDENTIAL</code>
        request attribute. If not set, the default value of <code>true</code>
        will be used.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


</section>


<section name="Error Report Valve">

  <subsection name="Introduction">

    <p>The <strong>Error Report Valve</strong> is a simple error handler
    for HTTP status codes that will generate and return HTML error pages.</p>

    <p><strong>NOTE:</strong> Disabling both showServerInfo and showReport will
    only return the HTTP status code and remove all CSS.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Error Report Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.ErrorReportValve</strong> to use the
        default error report valve.</p>
      </attribute>

      <attribute name="showReport" required="false">
        <p>Flag to determine if the error report is presented when an error
           occurs. If set to <code>false</code>, then the error report is not in
           the HTML response.
           Default value: <code>true</code>
        </p>
      </attribute>

      <attribute name="showServerInfo" required="false">
        <p>Flag to determine if server information is presented when an error
           occurs. If set to <code>false</code>, then the server version is not
           returned in the HTML response.
           Default value: <code>true</code>
        </p>
      </attribute>

    </attributes>

  </subsection>

</section>


<section name="Crawler Session Manager Valve">

  <subsection name="Introduction">

    <p>Web crawlers can trigger the creation of many thousands of sessions as
    they crawl a site which may result in significant memory consumption. This
    Valve ensures that crawlers are associated with a single session - just like
    normal users - regardless of whether or not they provide a session token
    with their requests.</p>

    <p>This Valve may be used at the <code>Engine</code>, <code>Host</code> or
    <code>Context</code> level as required. Normally, this Valve would be used
    at the <code>Engine</code> level.</p>

    <p>If used in conjunction with Remote IP valve then the Remote IP valve
    should be defined before this valve to ensure that the correct client IP
    address is presented to this valve.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Crawler Session Manager Valve</strong> supports the
    following configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.CrawlerSessionManagerValve</strong>.
        </p>
      </attribute>

      <attribute name="crawlerUserAgents" required="false">
        <p>Regular expression (using <code>java.util.regex</code>) that the user
        agent HTTP request header is matched against to determine if a request
        is from a web crawler. If not set, the default of
        <code>.*[bB]ot.*|.*Yahoo! Slurp.*|.*Feedfetcher-Google.*</code> is used.</p>
      </attribute>

      <attribute name="sessionInactiveInterval" required="false">
        <p>The minimum time in seconds that the Crawler Session Manager Valve
        should keep the mapping of client IP to session ID in memory without any
        activity from the client. The client IP / session cache will be
        periodically purged of mappings that have been inactive for longer than
        this interval. If not specified the default value of <code>60</code>
        will be used.</p>
      </attribute>

    </attributes>

  </subsection>

</section>

<section name="Stuck Thread Detection Valve">

  <subsection name="Introduction">

    <p>This valve allows to detect requests that take a long time to process,
    which might indicate that the thread that is processing it is stuck.
    Additionally it can optionally interrupt such threads to try and unblock
    them.</p>
    <p>When such a request is detected, the current stack trace of its thread is
    written to Tomcat log with a WARN level.</p>
    <p>The IDs and names of the stuck threads are available through JMX in the
    <code>stuckThreadIds</code> and <code>stuckThreadNames</code> attributes.
    The IDs can be used with the standard Threading JVM MBean
    (<code>java.lang:type=Threading</code>) to retrieve other information
    about each stuck thread.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Stuck Thread Detection Valve</strong> supports the
    following configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.StuckThreadDetectionValve</strong>.
        </p>
      </attribute>

      <attribute name="threshold" required="false">
        <p>Minimum duration in seconds after which a thread is considered stuck.
        Default is 600 seconds. If set to 0, the detection is disabled.</p>
        <p>Note: since the detection (and optional interruption) is done in the
        background thread of the Container (Engine, Host or Context) declaring
        this Valve, the threshold should be higher than the
        <code>backgroundProcessorDelay</code> of this Container.</p>
      </attribute>

      <attribute name="interruptThreadThreshold" required="false">
        <p>Minimum duration in seconds after which a stuck thread should be
        interrupted to attempt to "free" it.</p>
        <p>Note that there's no guarantee that the thread will get unstuck.
        This usually works well for threads stuck on I/O or locks, but is
        probably useless in case of infinite loops.</p>
        <p>Default is -1 which disables the feature. To enable it, the value
        must be greater or equal to <code>threshold</code>.</p>
      </attribute>

    </attributes>

  </subsection>

</section>

</body>


</document>
